EPF Hobbies Mercury 64mm 4700KV-CCW 3-4S Li-Po
Item #: EPF-D64101
Manufacturer: EPF Hobbies
Manufacturer’s Product Number: EPF-D64101
This Mercury 64mm Metal EDF unit is a cutting edge of EDF design. All Mercury 64mm Metal EDF parts are manufactured with precision CNC machine tools to maintain strict tolerances while enables a high level of accuracy in the manufacturing process.
This EDF is milled from aircraft grade high tensile Aluminum alloy to improve performance and also to help reduce deformity of the duct during installation. Moreover, the aluminum alloy structure acts as a heat sink for improved heat dissipation. There are 8 fan blades together with the motor are also milled from high tensile aluminum alloy as a single assembly. In addition, the fan-motor assembly has a cooling fan incorporated into it, as well as dynamically balanced at the factory, which means a time saver and less frustration for modeler from not having to spend hours balancing the fan unit and the motor.
This EDF unit has been tested in the wind-tunnel using Computer Aided Evaluation and found to reduce high speed deformation by 90%, as compared to a conventional ABS or plastic fan. The Mercury 64mm Metal EDF incorporates an innovative 3-bearing system to reduce resonance vibration by 90%. This vibration is common to all EDF design, which is caused by both the fan and motor vibration, which causes the blade tips to rub against the shroud of the duct.
Fan Jets USA only recommends that this edf unit operate on either a 3 or 4s lipo battery. We do not recommend using a 5s lipo with this edf unit.
BUILDERS NOTE: REFER TO THE “ELECTRIC SETUP GUIDELINE” ON THE HOME PAGE TO HELP DETERMINE THE PROPER SET UP FOR FAN, ESC, MOTOR AND BATTERY.
- Turbo Inner cooling System let Motor down to room temperature within 15~20 seconds half throttle.
- 60,000RPM Hight Speed Dynamic Motor and Fan balance adjustment
- High Precision CNC Cut Rotor and Fan.
- The 8 fan blade is the first in the world to use high tensile aluminum alloy.
- Full Alloy Design
- Optimized Air Flow.
- Motor: 2430-4700kv High Performance EDF Brushless
- EDF Unit: 64mm
- Battery: 11.1v ~ 14.8v (3s ~ 4s)
- AMP Draw: 65 amp (Max)
- Watts: 947 watts (Max)
- Motor: 6 pole
- Thrust: 1500g/ 3.3 lbs (Max) (Estimated)
- ESC: 75-80A
- Unit Weight: 160g
Flight Tip Caution: Motor will overheat and may burnt out at high timing. Make sure to set the ESC timing to LOW or 2 degree setting.
Insurance Note: Fan Jets USA recommends the purchase of shipping insurance. If insurance is not purchased and the package is lost or damaged, the most that can be claimed with the USPS and awarded to the purchaser (shipment recipient) is $50.00. Fan Jets USA is not responsible for reimbursing the purchaser the difference of an order of any amount. Shipping charges are not included in an insurance claim per USPS guidelines.
CA Residents: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
|Dimensions||7 × 3.5 × 3.5 in|