EPF Hobbies Mercury 90mm 1600KV-CCW 8S Li-Po V2 (Narrow)

$244.99 $199.99

Item #: EPF-D90102B
Manufacturer: EPF Hobby
Manufacturer’s Product Number: EPFD90102B
Condition: New

Out of stock


The narrow version features a smaller curved inlet lip.  This is designed to fit into foam jets or other jets with a closed duct system with out having to carve out an excessive amount of foam for the edf to fit into the fuse.

This Mercury 90A Metal EDF unit is a cutting edge of EDF design. All Mercury 90A Metal EDF V2 parts are manufactured with precision CNC machine tools to maintain strict tolerances while enables a high level of accuracy in the manufacturing process.

This EDF is milled from aircraft grade high tensile Aluminum alloy to improve performance and also to help reduce deformity of the duct during installation. Moreover, the aluminum alloy structure acts as a heat sink for improved heat dissipation. There are 12 fan blades together with the motor are also milled from high tensile aluminum alloy as a single assembly. In addition, the fan-motor assembly has a cooling fan incorporated into it, as well as dynamically balanced at the factory, which means a time saver and less frustration for modeler from not having to spend hours balancing the fan unit and the motor.

This EDF unit has been tested in the wind-tunnel using Computer Aided Evaluation and found to reduce high speed deformation by 90%, as compared to a conventional ABS or plastic fan. The Mercury 90A Metal EDF incorporates an innovative 3-bearing system to reduce resonance vibration by 90%. This vibration is common to all EDF design, which is caused by both the fan and motor vibration, which causes the blade tips to rub against the shroud of the duct.

Fan Jets USA only recommends that this edf unit is run on a 8S.  Running this edf unit on a 9s is not recommended.

This is version two of the very popular EPF 90mm all metal edf unit.  The fan unit features a newly designed housing in the front which allows more air intake producing better thrust and is lighter weight.  There is also more airflow designed to go through the motor keeping it cooler compared to previous models.



  1. Turbo Inner cooling System let Motor down to room temperature within 15~20 seconds half throttle.
  2. 60,000RPM High Speed Dynamic Motor and Fan balance adjustment
  3. High Precision CNC Cut Rotor and Fan.
  4. The 12 fan blade is the first in the world to use high tensile aluminum alloy.
  5. Full Alloy Design
  6. Optimized Air Flow.


  1. Motor: 1600kv High Performance EDF Brushless
  2. EDF Unit: 90mm
  3. Battery: 29.6v (8s Max)
  4. AMP Draw: 105 amp (Max)
  5. Watts: 3108 watts (Max)
  6. Motor: 8 pole
  7. Thrust: 4.5KG/ 9.9LB (Max) (Estimated)
  8. ESC: 120-160A (Max)
  9. Unit Weight: 405g

Flight Tip Caution: Motor will overheat and may burnt out at high timing. Make sure to set the ESC timing to Medium setting.

WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Insurance Note:  Fan Jets USA recommends the purchase of shipping insurance. If insurance is not purchased and the package is lost or damaged, the most that can be claimed with the USPS and awarded to the purchaser (shipment recipient) is $50.00.  Fan Jets USA is not responsible for reimbursing the purchaser the difference of an order of any amount.  Shipping charges are not included in an insurance claim per USPS guidelines.

CA Residents: WARNING: Cancer and Reproductive Harm –

Additional information

Weight 1.5 lbs
Dimensions 9.5 × 5.5 × 4.75 in

You may also like…