Sale!

HET 64mm Rotor with Collet

$24.99 $18.99

Item #:HET-EDF6404-rotor
Manufacturer: HET (High End Technology)
Manufacturer’s Product Number: HET-EDF6404-rotor
Condition: New

In stock

SKU: HET-EDF6404-rotor Categories: , Tags: ,

Description

The HET 64mm rotor and collet work with the 6404 fan unit to replace bad rotors. The fan unit is constructed of a carbon filled plastic and aluminum.

The HET fan unit will outperform Wemotec fans due to a stiffer fan housing.  A stiffer housing will produce more thrust, better efficiency and less of a chance of a rotor blade breaking off the hub at higher rpm’s.

BUILDERS NOTE: REFER TO THE “ELECTRIC SETUP GUIDE” ON THE HOME PAGE TO HELP DETERMINE THE PROPER SET UP FOR FAN, ESC, MOTOR AND BATTERY.

SPECIFICATIONS:

  • Colet Adapter Size: 3 & 3.17mm
  • Construction: Carbon Filled Plastic, Aluminum
  • Rotor: 4 bladed (63mm) dynamically balanced
  • Comes complete with tools, instructions
  • RPM Range: Up to 50,000 rpm

Insurance Note:  Fan Jets USA recommends the purchase of shipping insurance. If insurance is not purchased and the package is lost or damaged, the most that can be claimed with the USPS and awarded to the purchaser (shipment recipient) is $50.00.  Fan Jets USA is not responsible for reimbursing the purchaser the difference of an order of any amount.  Shipping charges are not included in an insurance claim per USPS guidelines.

WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

CA Residents: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Additional information

Weight .25 lbs
Dimensions 3 × 3 × 1.5 in

You may also like…