Schubeler DS-82-DIA HST with DSM6036-600

Sale!

$1,544.99$2,164.99

Item #: SCH-DS82HST-DSM6036-600
Manufacturer: Schubeler
Manufacturer’s Product Number: SCH-DS82HST-DSM6036-600
Condition: New

Description

Special Order the Schubeler DS-82 HST EDF with unparalleled performance and craftsmanship.  By purchasing this edf, please allow an estimated 5 weeks for delivery.  The edf units are custom-made per order at the factory and tested.

With the DS-82-DIA HST Schubeler launches a completely new jet propulsion system. The system is based on a new 12-blade axial compressor wheel which is driven by the all-new Schubeler electronic commutated motor.

The 120mm axial compressor generates a surpassing compression ratio and can therefore be integrated much more efficiently in huge jet models than classic ducted fans. The rotational speed level is only 28,000 rpm at an impressive exhaust speed of 87-98m/s and a thrust of 71-91N. This high thrust impulse is therefore generated by a high exhaust speed and a high inner efficiency of the axial fan stage. In figures that means you can integrate this fan in jets up to 120mm. The design of the 12-blade axial compressor wheel is based on speed ratios which are similar to the ratios of a full-scale turbofan. That results in high efficiency in a perfect optical scale appearance and a sound that can only be compared to full-scale jet engines. A silent whispering and fizzling of the axial compressor at idle rpm are predominated by an impressive jet stream noise coming from the exhaust at full throttle.

An extraordinary challenge was the development of an electronically commuted DC motor that perfectly fits the axial fan. The 12-blade compressor demands an impressive torque of 2,2Nm at 28,000rpm which can only be generated by a high torque motor of high diameter and shorter length. Consequently, the new DSM6036 Schubeler motor is fully integrated into the axial fan to assign a huge area for the main airflow. In addition to that, the motor is perfectly aligned and balanced.

The motor is cooled and needs no efficiency decreasing internal ventilator. The motor is based on a four-pole design to allow a flexible fit of the motor characteristics to the needs of the axial fan. Nevertheless, the winding sits in a 12-slot stater to increase the torque and avoid any winding deformation at high temperatures. The magnet is attached to a sheeted magnet holder and reinforced by a bandage made of IMS carbon fiber which allows a high rpm tolerance. The whole motor design was optimized in respect of excessive heat tolerance and of course a high efficiency even at high currents.

The mechanical design of the Schubeler DSM6036 motor is based on established mechanical engineering and distinguishes itself by a shaft mount consisting of a fixed bearing and a pre-stressed floating bearing. The front and end bell are fixed by 8 countersunk head screws, all surfaces are protected by hard anodizing. The result is very high durability in combination with a low mechanical soundscape which allows the whispering of the axial fan to predominate even at idle rpm.

The conjunction between the motor and axial fan is made by 4 handmade carbon stators which also guide the 3 motor phases through the UHM carbon sandwich shroud. The conversion of shaft power to stream power is accomplished by 12 handmade carbon rotor blades which sit form-closed in precision aluminum swivels.

Version 2.0: The new version features a new smaller diameter motor that increases the fan swept area from 77cm² to 82cm².  This gives a larger rotor size and produces more thrust while creating better cooling for the motor. The new version appeared on the market on 4/16/2016.

Features:

Improved aerodynamics at the stator for maximum thrust.

High-temperature-resistant adhesives allow for reliability even in extreme environments.

The rotor is enhanced by means of an optimized carbon fiber roving ensuring the highest crash resistance and reliability.

Slightly increased surface area for more take-off thrust.

Ribbed full aluminum stator providing cool motor operation at all times in combination with our patented cooling system.

The new 120mm DS-82-DIA HST still can be ordered with three different motor options. Motors have been optimized magnetically and equipped with a stiff 10mm precision shaft. All rotating components are fine-balanced. The propulsion is built from the finest carbon/epoxy and aluminum parts. High-modulus carbon fiber comes into use for the rotor blades and shell.

The DS-82-DIA HST is a fan of the 120mm class which can be applied within a wide performance range and runs extremely cool due to its high-efficiency level. That way we are in the position to guarantee long-lasting reliable operation of the fan in your high-quality jet model airplane!

OPTIONAL FULL COMBO: EDF UNIT, DSM BRUSHLESS MOTOR, YGE205HVT Series ESC (230 amp).  The DS-82-DIA HST® comes with the DSM6036-600 brushless motor and a YGE205HVT Series ESC programmed and wired. The combo comes programmed, wired and test run from the Schubeler factory.

Option 2: Carbon fiber bell-shaped/ straight intake ring

BUILDERS NOTE: REFER TO THE “ELECTRIC SETUP GUIDE” ON THE HOME PAGE TO HELP DETERMINE THE PROPER SETUP FOR THE FAN, ESC, MOTOR, AND BATTERY.

Specifications:

Inner shroud diameter: 120mm
Fan swept area: 82cm²
Weight incl. motor, wires, connectors and
Secure Fan Fix: 1240g
Thrust range: 71-91N/ 16-20lbs (Estimated)
Exhaust speed range: 87-98m/s
RPM Range: 24.000-28.500rpm
Input power: 4,2-6,2kW
Allowed battery: 12-14S 9000mAh
Overall efficiency: 71-72%

Brushless Speed Control Needed: 180-200hv ESC.

Speed Control Settings:

  • Timing should be 12°-18°
  • PWM frequency 14kHz.
  • Brake off.
  • Motor Pole Count: 4

OPTIONAL Brushless Speed Control: YGE205HVT Series ESC wired and programmed from Schubeler.

 

WARNING: Operating the motor outside of the specifications listed above can damage the motor, battery, or ESC. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory-recommended specs, then it needs to be adjusted by the ESC. The timing and throttle settings on the ESC can help to set the appropriate levels.

Insurance Note:  Fan Jets USA recommends the purchase of shipping insurance. If insurance is not purchased and the package is lost or damaged, the most that can be claimed with the USPS and awarded to the purchaser (shipment recipient) is $50.00.  Fan Jets USA is not responsible for reimbursing the purchaser the difference of an order of any amount.  Shipping charges are not included in an insurance claim per USPS guidelines.

CA Residents: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Additional information

Weight 2.5 lbs
Dimensions 9 × 9 × 8 in
Schubeler Optional Parts

Intake Ring/MGM 25063-3 ESC, MGM 25063-3 X Series ESC, None, Schubeler Intake Ring