Jetfan 80mm V3 EDF Unit
Item #: JETFAN-80EDF
Manufacturer’s Product Number: JETFAN-80EDF
The new JETFAN-80 V3 was developed from the proven JF-80. Thanks to the increased ring area (FSA) of 37.7 qcm and new lower resistance stator blades, the efficiency and engine cooling could be improved again! This results in an increase in thrust of up to 5% with the same input power! The design continues in the direction of high jet speed and dynamic thrust. Special care was taken to ensure that you can continue to use your tried and tested high-speed 36mm-40mm motors.
Matching complete heat sinks are available for 36mm motors like the HET-650 series, and for the 39mm motors like the HET-700 series there are enclosed tubes from 39.00 to 40.00mm, so that the various motors are always fully supported by the stator blades ,
The JETFAN80, a 9 blade modular rotor with all carbon housing, expertly hand made in Austria and very affordable! This Fan was specially developed for a new “Jetsound” . The sound is very unique and the sound intensity has been minimized in order to get a smooth Whooshing sound similar to a turbine. The high pitch frequencies have been minimized in the design.
Compared to other fan systems which are mainly made for static thrust we have the advantage of high speeds. The fan blade design has been developed so that you can use common Kv motors and ESC with just a little more amp draw than a regular 80mm fan. The fan does not require highly specific low Kv motors in order to work. A very affordable multi blade fan unit that gives you a jet like sound at an unbeatable price!
- Shaft Diameter: 5mm
- Weight: 3.8oz/107.7g
- Input Power: 350-4,500 Watts
- Thrust Output: Up to 4.6kg/ 10.14 lbs.
- Rotor: Balanced at Jetfan factory
- Outside Housing Diameter: 81mm
- Motor Diameter: 36-40mm
- Motor Shaft Size: 5mm
- Motor: HET 650 or 700 series edf motor recommended
- Fan Housing Material: Carbon Fiber
Insurance Note: Fan Jets USA recommends the purchase of shipping insurance. If insurance is not purchased and the package is lost or damaged, the most that can be claimed with the USPS and awarded to the purchaser (shipment recipient) is $50.00. Fan Jets USA is not responsible for reimbursing the purchaser the difference of an order of any amount. Shipping charges are not included in an insurance claim per USPS guidelines.
CA Residents: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
|Dimensions||4 × 4 × 1.5 in|
You may also like…
Jetfan 80mm Rotor
Jetfan 5mm Fan Collet
$14.99Add to cart
USPS Domestic Shipping Insurance$2.80 – $28.25 Select options
Jetfan 80 Carbon Fiber Intake Ring
$34.99Add to cart
USPS International Shipping Insurance$6.50 – $32.85 Select options
Jetfan 80mm EDF Straight Intake Ring
$29.99Add to cart