Installation Services



Manufacturer: Fan Jets USA
Manufacturer’s Product Number: FJU-INSTALL-SERVICE
Condition: New


Save time and stress by having the Fan Jets USA Crew perform various installation tasks such as soldering the gilt connectors to the motor,  mounting the motor into the EDF unit, or both.  The crew will check the balance of the EDF unit and adjust it if necessary.  The EDF units that we do carry come dynamically balanced from the factory.

Services Included:

Soldering Services: *Soldering of the bullet/gilt connectors to the motor or connectors to speed controls.  The items must be purchased from Fan Jets USA.  Items can not be sent to Fan Jets USA for soldering service. If both gilt connectors are to be soldered onto the motor and connectors onto an esc or to a watt meter.  Soldering services need to be purchased for both. So that would be a quantity of 2 for services.

Motor/EDF Unit Installation: *Installation of the motor into the EDF unit.  The EDF unit and motor must be purchased from Fan Jets USA on the same invoice as the EDF motor assembly service.

Installation of the heat sink. If the motor comes with a heat sink it will be installed and secured with a couple of drops of epoxy.  It is strongly encouraged to purchase Arctic Silver Thermal Grease for heat sink installation.  Must be purchased on the same invoice as assembly. HET 800 Series motors do not come with heat sinks.  The other HET series motors do.

 Order Items Checklist:

  • EDF Unit
  • Brushless Motor
  • Heat Sink (If the motor doesn’t come with one)
  • Arctic Silver Thermal Grease (Recommended with all motor installations!)

*Optional Service: Soldering of bullet connectors onto brushless motor for $14.99 if purchased with edf unit and motor.  Must be purchased as an option at the time of placing the order.  Must also purchase the gilt connectors to be installed onto the motor.

Please Note:  EDF assembly service is only offered on new EDF units, motors, and accessories purchased from Fan Jets USA.  This service is not available on items already in the customer’s possession.  Once the assembly is initiated the order can not be canceled or items returned.

The general lead time is two business days.  Once the order is placed please allow this time before the order is processed and shipped out.  This includes overnight or expedited shipping.  The expedited shipping holds for the shipping time, not on the EDF assembly service.

FAN JETS USA NOTICE: By purchasing the EDF motor assembly, the purchaser is agreeing to not hold Fan Jets USA responsible or liable for any problems incurred during the operation of the EDF unit. Fan Jets USA builders offer over 30 years of flying and building experience that is applied in the construction of the aircraft.

Additional information

Weight .1 lbs
Dimensions .1 × .1 × .1 in
Installation Service

Motor/Gilt Installation, EDF/Motor Installation, EDF/Motor/Gilt Installation