E-Jets Jetfan 120mm PRO EDF Unit

Sale!

$249.99

Out of stock

Item #: JETFAN-120EDF-PRO
Manufacturer: E-Jets
Manufacturer’s Product Number: JETFAN-120EDF-PRO
Condition: New

 

Description

The E-Jets JETFAN 120 PRO, a 11 blade modular rotor with all carbon housing, expertly hand made in Austria and very affordable! This Fan was specially developed for a new “Jetsound” . The sound is very unique and the sound intensity has been minimized in order to get a smooth Whooshing sound similar to a turbine. The high pitch frequencies have been minimized in the design.

The new fan has been developed to have a maximum efflux speed and static thrust. This makes a powerful and wide flying style possible with your model.

Compared to other fan systems which are mainly made for static thrust we have the advantage of high speeds. The fan blade design has been developed so that you can use common Kv motors and ESC with just a little more amp draw than a regular 120mm fan. The fan does not require highly specific low Kv motors in order to work. A very affordable multi blade fan unit that gives you a jet like sound at an unbeatable price!

Features an aluminum inner housing designed to help cool the motor.  The stators (6) are made out of carbon fiber to keep the weight down.

The new carbon-120 JETFAN-120 PRO has been developed by Jetfan for even more thrust with the same input power and better suction even with small and poor inlets. The Jetfan 120 Pro is able to achieve a weight reduction of 88 grams, and thus a total weight of 246 grams without heat sink, and 767 grams with mounted HET-800-73-590 KV engine!

The basic design has been tuned to 50mm engines that are airborne with your full surface and bring up to 10 kilos of thrust under test bench conditions at 14s.

The customers’ requirement for a little more “audible punch and turbine noise” is achieved by more blades and lowering of the speed. Thus, we have again a distinctive sound, and could suppress the unpleasant high frequencies.

ATTENTION: The engine shown is NOT included in the scope of delivery of the impeller!

ATTENTION: The illustrated inlet lip is also not included, but can be ordered separately!

BUILDERS NOTE: REFER TO THE “ELECTRIC SETUP GUIDE” ON THE HOME PAGE TO HELP DETERMINE THE PROPER SET UP FOR FAN, ESC, MOTOR AND BATTERY.

Specifications:

  • Carbon Fiber Housing, Carbon Fiber filled rotor, Aluminum Hub
  • Weight: 8.3oz
  • Outer Housing Diameter: 123mm
  • Inner Housing Diameter: 121
  • Housing Length: 80mm
  • Rotor: 12 bladed dynamically balanced
  • Motor Shaft Size: 8mm chuck adapter
  • Static Thrust: 12.3-19.5 lbs
  • Comes complete with mounting tabs and instructions
  • Takes a motor with a diameter of 50mm.

Recommended Motors: HET Typhoon 800 motors.

PICTURE NOTE: THE INTAKE RING IN THE PICTURE DOES NOT COME WITH THE 120MM FAN UNIT.

Video Note: The videos below are of the 120mm Jetfan unit just to demonstrate the whooshing sound that the Jetfan edf units are famous for.

Insurance Note:  Fan Jets USA recommends the purchase of shipping insurance. If insurance is not purchased and the package is lost or damaged, the most that can be claimed with the USPS and awarded to the purchaser (shipment recipient) is $50.00.  Fan Jets USA is not responsible for reimbursing the purchaser the difference of an order of any amount.  Shipping charges are not included in an insurance claim per USPS guidelines.

CA Residents: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Additional information

Weight .75 lbs
Dimensions 5 × 5 × 5 in