E-Jets Jetfan 130mm EDF

The E-Jets JETFAN 130 PRO, a 10-blade modular rotor with all-carbon housing, is expertly hand-made in Austria and very affordable! This Fan was specially developed for a new “Jetsound”. The sound is very unique, and the sound intensity has been minimized in order to get a smooth Whooshing sound similar to a turbine. The high pitch frequencies have been minimized in the design.

The new fan has been developed to have a maximum efflux speed and static thrust. This makes a powerful and wide flying style possible with your model.

Compared to other fan systems, which are mainly made for static thrust, we have the advantage of high speeds. The fan blade design has been developed so that you can use common Kv motors and ESC with just a little more amp draw than a regular 120mm fan. The fan does not require highly specific, low Kv motors in order to work. A very affordable multi-blade fan unit that gives you a jet-like sound at an unbeatable price!

Features an aluminum inner housing designed to help cool the motor.  The stators (6) are made out of carbon fiber to keep the weight down.

The new carbon JETFAN-130 PRO has been developed by Jetfan for even more thrust with the same input power and better suction, even with small and poor inlets.

The customers’ requirement for a little more “audible punch and turbine noise” is achieved by more blades and a lowering of the speed. Thus, we have again a distinctive sound and could suppress the unpleasant high frequencies.

Intake lip included in the price.

BUILDERS NOTE: REFER TO THE “ELECTRIC SETUP GUIDE” ON THE HOME PAGE TO HELP DETERMINE THE PROPER SETUP FOR THE FAN, ESC, MOTOR, AND BATTERY.

Specifications:

• Carbon Fiber Housing, Carbon Fiber filled rotor, Aluminum Hub
• Weight: 444 g
• Outer Housing Diameter: 133mm
• Inner Housing Diameter: 130mm
• Housing Length: 100mm
• Rotor: 10-bladed, dynamically balanced
• Motor Shaft Size: 10mm chuck adapter
• Static Thrust: 20-23 lbs (Estimated)
• Comes complete with mounting tabs and instructions
• Takes a motor with a diameter of 56mm.
• Rotor: Dynamically balanced at the factory.